Features
The MAPA Products Rainproof Pedestals provides a means to mount a variety of services for local applications. The Stainless Shroud with integrally welded deck flange enables a positive weather-tight flash of the unit to the roof membrane without the need for additional flashing or pitch-pan.
Pedestals are furnished completely assembled. Leads for connection to the power source below the roofline are shielded in Flexible Metal Conduit. Wiring and conduit sizes are according to industry standards and NEC. All fixtures are within NEMA 3R rainproof enclosures. Connections exposed to weather are made liquid tight.
Optional Flashing:
16" X 16" stainless steel upper deck flashing or an optional 12" X 12" Deck Cap
Custom configurations are available to meet specific design criteria. Contact Mapa for more information.
Specifcations
Example: MX-1.375 - (Clamp Size)-SA
The Structurally Attached Support Series provides a manufactured support designed to secure single piping systems on single ply or built-up roofs in areas where seismic or high wind zones are of concern and where structural design allows for system loads at attachment points.
- Valve Assembly 125 psi 3/4" Ball Valve; Male Hose Fitting/Quick Disconnect
- Drain Features Provided with "loose-fit"wye-strainer for field installation
- Handle Black powder coated cast aluminum Weather Guard Dome Handle
- Shroud Grade 304 stainless steel shroud w/ welded stainless steel flange
- Insulation R-8 rated / Thermo Cell Insulation
- Mounting Hardware Black powder coated under-deck support flange w/ hardware
- Optional Deck Cap - Suffix "D"
ICS / Industrial Control Station
- Panic Button - Disengages the system-requiring key activation to re-engage.
- Key Switch - Activates the system each time a circuit is to be engages.
- Control Switch - Activates circuit(s) with key activation or deactivates to OFF
- Panel Mounted LED - Indicates that System is Active. Available Companion Components: Individual solenoids as well as solenoid enclosures are available as companion components for the ICS. Additionally, service panels can be custom assembled for application demands where output circuitry is in excess of units ratings.
ICS Single
Our Industrial Control Station provides a unique packaged system for local authority over a variety of services via control circuitry coordinating with preassembled solenoid/valve and electrical companion enclosures. These systems afford the ability to monitor the application, as well emergency shutdown.
- 2-Hole, Heavy-Duty Stainless-Steel Pipe Straps.
- Pre-formed to secure tubing to roller supports with a loose fit allowing for expansion and contraction of the pipe.
- Pipe Straps are set over the pipe then secured with provided hardware.
ICS Double 
Model Numbers
- Series and Model Specifics:
Model MPD – 30:36/12 General Duty - Unit utilizes a Square D Model # D221NRB or Eaton Model # DG221NRB Safety Switch. 2 wire (2 Blades and 2 Fuse holders, 1 Neutral) 120-240 Vac. Max rating 30 amp.